ShoreLand'r TA1066 - Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003600
Page 1 11/17/05
ACCESSORY
TA1066
Pontoon/Tritoon Kit
TA1066 ASSEMBLY INSTRUCTIONS
The TA1066 kit is used to convert a standard pontoon trailer that
is already assembled in the field to a Tritoon trailer. The item that
makes this kit unique from the TA1067 is the tongue assembly for
this trailer is already installed and will have to be removed and
replaced with the longer Tritoon tongue supplied with the kit. It is
accomplished as follows:
REMOVING THE TONGUE OF THE EXISTING TRAILER
Disconnect the tongue harness from the side frame harnesses and
ground wire.
Disconnect the tongue brake line from the tube coupling that con-
nects to the frame brake line.
Remove bolt holding tongue cover and rear of tongue. Also remove
cross bolt from tongue channel. Remove the tongue and place on
saw horses.
Remove the bolts holding the actuator housing to the tongue and
slide off the end of the tongue. Disconnect the tongue brake line
from the actuator.
Remove the safety chains.