Eiki EVW-100 - Manual (Page 6)

6
Remove Imager Box from Projector
Press the LATCH BUTTON to the arrow
direction. Then pull and remove the
Imager Box. CAUTION :Removing by force may
damage the Imager Box.
(Fig.-3)
Press the LATCH
BUTTON.
CAUTION : Do not remove the Imager Box from the projector while the projector is
on. It may damage data in a memory card and the card itself.
Load and Remove CF Card
Load CF Card
(Fig.-4)
CF CARD
EJECT BUTTON INDICATOR
1
2
Insert the CF Card into the CF Card slot
of the Imager Box until the EJECT BUT-
TON pops out.
• Do not insert it in the wrong way. It may damage
the equipment.
Remove CF Card
Press the CF CARD EJECT BUT-
TON. The CF Card is released.
Pull out the CF Card from the Imager
Box.
Do not remove a CF Card while
the indicator is lighting. It may
damage the card and the data
in it.
CAUTION
Insert the CF Card with the
mark
▲ ahead.
Pull and remove the
Imager Box.