Evolution Technologies EV64AMX - Manual (Page 20)

Back to Index
20
Software Utility
Upon the driver installation is completed, two software utilities
will be installed in PC.
Customer can use the utilities to format or upgrade the unit.
Connect to PC and open Start >Program> Mp3 Player menu
(Windows OS).
Storage Device Format Utility
User will be able to format the flash memory of the unit through
the MP3 Player Format utility shown below. The utility can
either be initialized through the Start Menu or by right clicking
on the removable storage device drives in Windows Explorer.
Quick format checkbox:
Empty (default): Completely format
Checked : Quick format, not scan for bad sectors.
* Please avoid to use other format utility to format the unit or the
Smart Media card.
Firmware Upgrade Utility
The firmware in the player will be able to upgrade through a
utility running on your PC. To update the firmware, user needs to
run the MP3 Player Update utility shown below. This utility can
be initialized through the Start Menu of Windows.
The [Quick download] check box :
Checked (default) : update the firmware and no format the
memory
Not checked (Empty) : update the firmware and format the
memory. All contents in the flash memory will be lost.
* If it is to refresh the firmware, please let the check box empty,
and upgrade the firmware by same version firmware as current.
Appendix
C
It is forbidden to unplug the USB cable while the unit is
accessing with computer (while the LCD displays [USB
READING] or [USB WRITING] ), because it may cause
serious damage to the unit or computer system.
It is strongly recommended to unplug the cable ONLY
while the LCD displays [USB IDLE].
Notice