SMA Communit-10 User Manual
Installation manual communit
Advertising
Table of contents
Document Outline
- 1 Information on this Document
- 2 Safety
- 3 Product Description
- 4 Scope of Delivery
- 5 Mounting
- 6 Electrical Connection
- 6.1 Overview of the Connection Area
- 6.2 Inserting the Cables into the Communication Distribution Unit
- 6.3 Connecting the Cables to the Connecting Terminal Plates
- 6.3.1 Connecting Conductors to the Spring-Cage Terminal
- 6.3.2 Connecting the Cable Shield Contact
- 6.3.3 Connecting the Communit Supply Voltage
- 6.3.4 Connecting the Cables for the SMA Cluster Controller
- 6.3.5 Connecting the Cables for the I/O Modules
- 6.3.6 Connecting the RS485 Cable of the Sunny SensorBox
- 6.3.7 Connecting the Voltage Supply of Your Own Optional Devices
- 6.4 Connecting the Cables to the Network Switch and Router
- 6.5 Splicing and Connecting the Optical Fiber
- 6.6 Connecting the Network Cable via the Keystone Jack
- 7 Commissioning the Communit
- 8 Communit Maintenance Work
- 9 Decommissioning
- 10 Troubleshooting
- 11 Technical Data
- 12 Contact