SMA BLUETOOTH REPEATER OUTDOOR - Manual (Page 17)

SMA Solar Technology AG 5 Assembly
Installation Manual BTREPOUT-IA-en-11 17
6. Check that the connection quality for all devices is at least "good". During this procedure, all
devices must be in their usual positions (e.g., the Sunny Beam with Bluetooth must not be held
directly in front of the Bluetooth Repeater Outdoor):
☑ The connection quality displayed is at least "good" for all devices. Mount the Bluetooth
Repeater Outdoor there at this location.
✖ The connection quality displayed is not at least "good" for all devices?
• Move the Bluetooth Repeater Outdoor to another position and check the connection
signals again.
• If necessary, install additional SMA Bluetooth Repeater Outdoor devices.
Product Good connection quality
Bluetooth Repeater Outdoor One blue and two yellow LEDs are lit
Sunny Boy of the type SB x000TL-2x and
SB xx00HF-30, Sunny Tripower of the type
STP xx000TL-10 At least two rings are shown in the
inverter display
Other types of SMA inverters with
Bluetooth Piggy-Back or
Bluetooth Piggy-Back Plus
Use the communication product to check
whether the connection signal is improved by
using the Bluetooth Repeater Outdoor
(see manual of the communication product)
Communication product See manual of the communication product