Encore electronic ENLWI-NX2 - Manual (Page 6)

UNPACKING AND SETUP
This section provides unpacking and setup information for the ENLWI-NX2
Wireless 802.11n PCI Adapter.
Unpacking
The box should contain the following items:
‹
One ENLWI-NX2 PCI Adapter
‹
One Driver & Utility CD-ROM
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
Before installation, check the following:
‹
Make sure your computer is running at least a 300MHz or above processor with
256MB RAM or above
z Visually inspect the PCI Adapter and make sure that it is fully plugged in to the
PCI slot.
‹
The operating system on your computer must be the following: Windows®
2000 (Service Pack 4), XP (Service Pack 2), Windows Vista™
‹
A draft 802.11n or 802.11b/g access point.
‹
Make sure the environment has minimal interference and obstructions.
2