SMA SC 500HE-20 Maintenance Manua User Manual
SMA Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Information on this Document
- 2 Safety
- 3 Maintenance Intervals
- 4 Sunny Central HE-20
- 5 Maintenance when Voltage is Present
- 6 Maintenance Under Voltage-Free Conditions
- 6.1 Disconnecting the Inverter
- 6.2 Disassembling the Panels
- 6.3 Replacing Ventilation Grid Mats
- 6.4 Maintaining the Interior of the Switch Cabinet
- 6.5 Checking the Switch Cabinet from the Outside
- 6.6 Mounting the Protective Covers
- 6.7 Mounting the Panels
- 6.8 Maintenance after Connecting the Control Voltage
- 7 Maintaining the Accessories
- 7.1 Maintaining the Sunny String-Monitor
- 7.1.1 Disconnecting the Sunny String-Monitor
- 7.1.2 Maintenance Interval
- 7.1.3 Overview of the Main Components
- 7.1.4 Checking the Mounting Location and Installation
- 7.1.5 Checking the Enclosure
- 7.1.6 Checking the Enclosure Interior
- 7.1.7 Checking the Base Plate
- 7.1.8 Checking the Covers and Labels
- 7.1.9 Checking the Fuses and Fuse Holders
- 7.1.10 Checking the Screw Connections and Clamp Connections
- 7.1.11 Checking the Surge Arrester
- 7.1.12 Checking the Supply Voltage
- 7.1.13 Checking Shunt Release (Optional)
- 7.1.14 Checking the Undervoltage Release (Optional)
- 7.1.15 Checking the Earth Connection
- 7.1.16 Checking the LEDs on the Measurement PCB
- 7.2 Maintaining the Sunny Main Box
- 7.2.1 Disconnecting the Sunny Main Box
- 7.2.2 Maintenance Interval
- 7.2.3 Overview of the Main Components
- 7.2.4 Checking the Mounting Location and Installation
- 7.2.5 Checking the Enclosure
- 7.2.6 Checking the Enclosure Interior
- 7.2.7 Checking the Base Plate
- 7.2.8 Checking the Covers and Labels
- 7.2.9 Checking the Fuses and Fuse Holders
- 7.2.10 Checking the Screw Connections and Clamp Connections
- 7.3 Maintaining the SMA String-Combiner
- 7.3.1 Disconnecting the SMA String-Combiner
- 7.3.2 Maintenance Interval
- 7.3.3 Checking the Mounting Location and Installation
- 7.3.4 Checking the Base Plate
- 7.3.5 Checking the Enclosure and Enclosure Interior
- 7.3.6 Checking the String Cables
- 7.3.7 Checking the Covers and Labels
- 7.3.8 Checking the Fuses and Fuse Holders
- 7.3.9 Checking the Screw Connections and Clamp Connections
- 7.3.10 Checking the Surge Arrester
- 7.1 Maintaining the Sunny String-Monitor
- 8 Contact