SMA STP 8000TL-10 - Manual

STP8-17TL-BA-en-40 | IMEN-STP10-17TL | Version 4.0 EN
PV Inverter
SUNNY TRIPOWER
User Manual
8000TL/10000TL/12000TL/15000TL/17000TL
Symbols on the Inverter
Operation display
Bluetooth ® Wireless Technology.
Bluetooth communication active.*
An error has occurred. Inform your installer immediately.
There are special requirements for earthing.
Symbols on the Type Label
Beware of dangerous voltage.
The inverter operates at high voltages. Any electrical work on the inverter must be
carried out by electrically qualified persons only.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact during operation.
Observe enclosed documentation.
The inverter must not be disposed of together with household waste.
Further disposal information can be found in the enclosed installation manual.
CE marking: The inverter complies with the requirements of the applicable EC
directives.
RAL quality mark for solar products: The inverter complies with the requirements of
the German Institute for Quality Assurance and Labelling.
Device class label: The inverter is equipped with a wireless component that complies
with the harmonised standards.
Certified safety: The inverter complies with the requirements of the European
Equipment and Product Safety Act.
Australian mark of conformity
Korean mark of conformity
Direct current (DC)
Three-phase alternating current (AC) with neutral conductor
The inverter is protected against dust intrusion and water jets from any angle.
The inverter does not have a transformer.
* The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of these marks by SMA Solar Technology AG is under licence.
AC
Abbreviation for "Alternating Current".
Bluetooth
Bluetooth is a radio technology that allows the inverter and other communication products to
communicate with each other. Bluetooth communication does not require line of sight between the
devices.
DC
Abbreviation for "Direct Current".
Electronic Solar Switch (ESS)
The Electronic Solar Switch is part of the DC disconnection unit of the inverter. The Electronic Solar Switch
must be securely inserted into the bottom of the inverter and may only be removed by a skilled person.
Energy
Energy is measured in Wh (watt hours), kWh (kilowatt hours) or MWh (megawatt hours). The energy is
the power calculated over time. If, for example, your inverter operates at a constant power of 3,000 W
for half an hour and then at a constant power of 2,000 W for another half an hour, it has fed 2,500 Wh
of energy into the power distribution grid within that hour.
Power
Power is measured in W (watts), kW (kilowatts) or MW (megawatts). Power is an instantaneous value.
It displays the power your inverter is currently feeding into the power distribution grid.
PV
Abbreviation for photovoltaics.
Visual Inspection
Check the inverter and cables for any visual signs of external damage. Contact your installer if you find
any damage. Do not perform any repair work yourself.
Maintenance and Cleaning
If the inverter is dirty and the visibility of the operating data and operating states of the inverter is
limited, clean the enclosure lid, the display and the LEDs with a damp cloth. Do not use any corrosive
substances (e.g. solvents or abrasives) for cleaning.
Ask your installer to check for correct inverter operation at regular intervals.
ExPLANATION Of SYMbOLS VISUAL INSPECTION, MAINTENANCE AND CLEANINg
gLOSSARY
If you have technical problems, first contact your installer. The following information is required in
order to provide you with the necessary assistance:
• Inverter device type
• Inverter serial number
• Type and number of PV modules connected
• Event number or display message on the inverter
• Optional equipment (e.g. communication products)
SMA Solar Technology Ag
Sonnenallee 1
34266 Niestetal, Germany
www.SMA.de
SMA Service Line
Inverters: +49 561 9522 1499
Communication: +49 561 9522 2499
Fax: +49 561 9522 4699
E-Mail: [email protected]
CONTACT
Installer Contact