SMA STP 15000TL - Manual

Outdoor The inverter is suitable for outdoor installation.
RAL quality mark for
solar products
The inverter complies with the requirements of the German
Institute for Quality Assurance and Labelling.
Certified safety The inverter is VDE-tested (Association for Electrical, Electronic
and Information Technologies) and complies with the
requirements of the German Equipment and Product Safety Act.
Australian mark of
conformity
The inverter complies with the requirements of the applicable
Australian guidelines.
Korean mark of
conformity
The inverter complies with the requirements of the applicable
Korean guidelines.
Chinese mark of
conformity
The inverter complies with the requirements of the applicable
Chinese guidelines.
STP20TLHE-BA-BEN122221 l IMEN-STP20TLHE l Version 2.1 EN
User Manual
SUNNY TRIPOWER 20000TL High Efficiency
SUNNY TRIPOWER 20000TL Economic Excellence
SUNNY TRIPOWER 15000TL High Efficiency
If you have technical problems, first contact your installer. The following information is required in order to provide
you with the necessary assistance:
• Inverter device type
• Inverter serial number
• Type and number of the PV modules connected
• Event number and display message on the inverter
• Optional equipment, e.g. communication products
• Confirmation of whether or not a multi-function relay is used
SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal, Germany
www.SMA.de
SMA Service Line
Inverters:
+49 561 9522 1499
Communication: +49 561 9522 2499
Fax:
+49 561 9522 4699
E-Mail: [email protected]
Installer Contact
CONTACT
Symbols on the Inverter
Inverter This symbol defines the function of the green LED. The green LED
indicates the operating state of the inverter.
Observe the
documentation
This symbol defines the function of the red LED. The red LED
indicates a fault. If the red LED lights up, contact your installer.
Bluetooth This symbol defines the function of the blue LED. The blue LED
indicates that communication via Bluetooth is activated.
QR-Code ® * By scanning this code, the solar power professional installing the
inverter can register the inverter and take part in the SMA bonus
programme.
Danger There are special requirements for earthing.
* QR-Code ® is a registered trademark of DENSO WAVE INCORPORATED.
Symbols on the Type Label
Danger to life due to
high voltages
The inverter operates at high voltages. All work on the inverter
must be carried out by skilled persons only.
Risk of burns due to
hot surfaces
The inverter can become hot during operation. Avoid contact
during operation.
Observe the
documentation
Observe all documentation that is supplied with the inverter.
DC Direct current
Without transformer The inverter does not have a transformer.
AC Three-phase alternating current with neutral conductor
Proper disposal Do not dispose of the inverter together with the household waste.
CE marking The inverter complies with the requirements of the applicable EC
directives.
Device class ID The inverter is equipped with a wireless component and complies
with device class 2.
IP54 Degree of protection The inverter is protected against dust deposits in the interior and
against splashes of water from all angles.
ExPLANATION Of SYMbOLS
GLOSSARY
Bluetooth*
Bluetooth is a radio technology that allows the inverter and other communication devices to communicate with
each other. For Bluetooth communication, the Bluetooth devices do not need to be within sight of each other.
DC switch-disconnector
The DC switch-disconnector enables the inverter to be safely disconnected from the PV array. The DC switch-
disconnector may be operated by skilled persons only.
Energy
Energy is the power which a system can supply or consume within a certain time unit. Energy is measured in Wh
(watt hours). If, for instance, your inverter feeds in for half an hour at 3,000 W and half an hour at 2,000 W, it
will have fed a total of 2,500 Wh into the electricity grid.
Multi-function relay
The multi-function relay is an optional accessory to the inverter. The multi-function relay acts as an interface for
managing a fault indicator or another external load. Depending on the parameters and measured values, the
inverter determines when the connected load is switched on and off.
Power
Power is the product of voltage and electrical current strength. Power is measured in W (watts). The power shown
in the display is an instantaneous value. It indicates the power your inverter is currently feeding into the electricity
grid.
PV
Abbreviation for photovoltaics.
*The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of this mark by
SMA Solar Technology AG is under licence.
SUNNY TRIPOWER 15000TL Economic Excellence
PV Inverter