SMA WBP-Box - Manual (Page 12)

4 Mounting the Windy Boy Protection Box SMA Solar Technology AG
12 WBP-Box-IEN103320 Installation Guide
1. Mark the position of the drill holes. Observe the fixing point distances when doing so.
2. Drill the holes according to the markings and insert
wall anchors.
3. Insert 2 screws into the 2 upper holes. Leave the
screws protruding out by 3 mm.
4. Hang the Windy Boy Protection Box onto the upper
screws using the mounting links.
5. Secure the Windy Boy Protection Box using the
lower fixing points.
6. Tighten both upper screws.