Ericsson Distribution Receiver RX8300 - Manual (Page 6)

Single Service Filtering
In many situations the incoming stream contains a
multiplex consisting of a number video services but
only one service is actually required to be ingested as
a transport stream into the receiving network. Ericsson
RX8000 receivers have the capability to perform Single
Service Filtering to strip out the wanted service which
can then be output into the network over ASI or onto an
IP backbone saving significant bandwidth loading onto
that backbone infrastructure.
Channels
Channel
ASI or IP TS
output
1x SPTS
CA
IP
Service
filtering
Service Plus
Sat 1 Txp 1
Service 4
Service 3
Service 2
Service 1
Service 5
Service 6
Service 7
Service 8
1
2
3
4
5
6...
2 MPTS
Lower Your Network Bandwidth Loading
RX8300 Distribution Receivers bring a step-change in service processing ability within an IRD package. Under the
umbrella of Service Plus, the RX8000 receivers have the capability to perform Single Service Filtering, Multi-Service
descrambling and splitting.
Multi-Service Filtering
Should multiple services be required to be ingested
into a network then one RX8000 receiver can used
to process these services - dramatically reducing the
unit count and inherent cost of a multi-box solution.
RX8000 receivers have the capability to select from
the incoming multiplex of services, pick off a required
subset, descramble those required and if desired split
the services into multiple IP streams and route each
individual service to a different port on an IP network
vastly simplifying management of network content.
Channels
Channel
Nx SPTS
CA MPTS
IP
Service
Filtering
Service Plus
Service
Splitting
Sat 1 Txp 1
Service 1
Service 2
Service 3
Service 4
Service 5
Service 6
Service 7
Service 8
1
2
3
4
5
6... 1
2
3
8
The RX8300 Distribution Receivers are part of a broad portfolio of Contribution and Distribution solutions from
Ericsson. For more information on our RX8300 receivers or any other products please make contact with our
worldwide team.