0 led for pcnc power input – Yaskawa YASNAC PC NC Connecting Manual User Manual
Page 45
Advertising
2 - 11
YASNAC PCNC Connecting Manual
Chapter 2: Power Supply
2.3.0
LED for PCNC Power input
The status of +24V power supply to the CNC unit can be confirmed by the LED.
The LED is lit when +24V power is supplied properly.
When +24V power is not supplied or when the fuse inside the PCNC unit is blown out due to a
fault of PCNC unit, the LED will be unlit.
Advertising