iHealth Wireless Blood Pressure Wrist Monitor - Manual (Page 2)

Charge Battery Prior First Time Use
Connect the monitor to a USB port using the charging cable provided until the green indicator
light stabilizes.
Connect to iOS Device via Bluetooth
• Apply the cuff or press the START/STOP button, the Bluetooth indicator will begin
flashing.
• Turn Bluetooth "On" under the "Settings" Menu on the iOS device.
• Wait until the model name printed on the monitor, (i.e. "BP7 xxxxxx") and "Not Paired"
appear in the Bluetooth menu, and select the model name "BP7 xxxxxx" to pair and
connect. The Bluetooth indicator will remain steady upon successful connection. When
using the monitor for the first time, it may take up to 30 seconds for your iOS device to
detect the Bluetooth signal.
• Each subsequent time you use the monitor, "Not Connected" will be displayed next to
"BP7 xxxxxx" in the Bluetooth Menu.
• Please repeat these steps when you switch to another iOS device with the monitor.
Monitor Status Bluetooth Indicator
Waiting to connect Flashing blue light
Connected and measuring Steady blue light
Measurement completed and ready to disconnect Gradually extinguishing light