Invotel SX8800 - Manual

All-In-One Professional Music-On-Hold
MP3 USB/SD Digital Player/ Adapter
Models: SX8800 2LP, SX8800 4LP
Rev 30
• Do not connect power yet, 1
st
Insert the SD card or the USB Flash drive and make sure it is IN fully
• Plug the included AC adapter. (110/240 V AC to 12V DC)
• Confirm that all 2/4 Red LED lights in front of this unit are double blinking
• Confirm that STATUS LED light turns ON
• Use one of your telephones and unplug the cord for L1/L2 from it and connect it to L1/L2 IN jack on
SX8800, now connect L1/L2 OUT jack to your telephone using the provided phone cord, make sure
you have dial tone on your lines 1 and 2
• Now unplug the cord for L3/L4 from your phone and connect it to L3/L4 IN jack on SX8800 and
connect L3/L4 OUT jack on SX8800 to your telephone using the provided phone cord, make sure you
have dial tone on your lines 3 and 4
• Observe that as you connect the lines the blinking lights turn OFF. (on non existing lines the lights keep
blinking and that is OK)
• • • • Alternatively you may use a splitter (T adapter) at the Wall jack to connect both this device and a
telephone
(in that case the L1/L2 OUT and L3/L4 OUT jacks are not connected)
• • • • Turn the Speaker ON and Adjust the volume to mid level.
L1/L2
IN
L3/L4
IN
L3/L4
OUT
110/240 V
L1 L2
VOLUME
STATUS
SD Card slot
Please note: just one telephone may be
connected to this device, other telephones
remain connected to their own wall jacks.
L1/L2
OUT
OUTPUT
1 2 3
12VDC 600Ω 8Ω EXT
1 2 3
3/4 1/2
L3 L4 A B C
A B C
SD Card
ON OFF R
SPEAKER
Back
RECEP
Front
RECEPT
USB FLASH DRIVE
Wall mount drill areas