Advanced features, Package content, Email auto load – Invotel SX9800 User Manual

Page 2: Volume setting for email auto load, Cd auto load, Specifications

Advertising
background image

ii

If the MX9008/Mx9017 Flash card is already pre-recorded, audio playback
starts automatically as soon as power is connected, the LED lights dance
ON.

Advanced Features:

Email Auto Load
Tone control for supper BASS
Dual Banks
Dual Outputs 8Ω , 600Ω
Built-in SPEAKER Transducer
Visual playback indicator with dancing multi-color LEDs
1000 mili Watt amplifier

Package Content:

SX9800E Digital Player/Recorder Unit
Power Adapter 110v AC to 9-12V DC/AC 100-200 ma
RCA to RCA audio cord 6 feet long
3.5mm Male to 3.5mm Male audio cord 12 feet long
User’s Manual

Email Auto Load:

SX9800E is the 1

st

device in the world with an exclusive feature: “It can be

automatically recorded by playing an email”. The production audio emailed to you
from your dealer contains a “coded noise file” that automatically activates & then
stops the recording process (The RED LED light indicates recording is in progress,
the noise codes themselves will not be recorded), all other audio that you play on
your PC will not effect the SX9800E.

Volume setting for Email Auto Load

The recording volume is directly effected by the volume setting on your PC, we
recommend you set the volume to about 75% level. Please note your PC volumes is
adjusted as follows:
Double click on Speaker symbol (located on lower right hand side of your screen)

CD Auto Load:

SX9800E can automatically be recorded from a PC CD ROM drive or a CD player,
Just insert the CD you received from your dealer into the CD ROM drive of your PC
or insert it into your CD player (volume mid level ), press the play button on the CD
player and walk away. The CD contains a code that starts the recorder in SX9800E
(RED LED turns ON) and then stops the recorder, the LEDs dance back ON and play
back resumes. The CD player stops on its own.

BANK Selection Flipping the Mode switch to B(Bank 2), the SX9800E will begin
immediate playback of bank2. Normally Mode A(Bank1) holds your Holiday
production and Mode B (bank2) holds your regular production. If you are updating
your regular production make sure switch is set to Mode B (BANK 2)

Adjusting Output VOLUME If the On Hold audio volume is too low turn the
VOLUME control clockwise; If it is too loud turn the VOLUME control counter
clockwise to desired level.

Adjusting Output TONE Use the TONE control to adjust the output frequency. This
is a very important function and it could make the audio sound much better. Turning
the TONE control clockwise amplifies the high frequencies while turning it counter
clockwise increases the low frequencies and provides supper BASS.

Dual Output RCA 8Ω

Ω & 600Ω

Ω There are 2 output jacks, the 8 Ω and 600 Ω, use

either output that works better for your phone system. The 8Ω RCA has an amplified
1000 mili-watt direct audio output, the 600Ω provides transformer isolated output.

SPEAKER The SPEAKER switch allows you to hear the audio being played by the
SX9800E built-in speaker transducer. Turn SPEAKER ON to hear the audio for your
testing confirmation purposes, turn it OFF other times. Note: Do not adjust VOLUME
too loud to hear the speaker better, this could make your On Hold audio very loud.
Use this switch to confirm that player is playing then set the VOLUME back to the
acceptable level required for your phone system.

Specifications

File Formats supports any sound file format such as Windows .wav, MP3, WMA, etc.

Frequency response 20Hz to 20 KHz.

Sampling rate 8-bit/16-bit uncompressed PCM @ 8, 11, 12, 16, 22, 24, 32, 44 & 48 KHz

Distortion less than 0.1% THD

Audio Quality supports better than CD Quality at 188 KB/s

Special effects: supports Windows Media Files and SRS WOW Effects

Memory Capacity 1 to 32 minutes (17 minutes @ full 188 KB/s sample rate).

Memory Type Multi-level Flash, 100 years retention time at no power, 100K re-recordable

Playback auto-repeat

Message loading Email load, automatic via playing the email; CD load automatic

Power supply 110VAC 60 Hz. To 9-12VAC/DC 100-200ma

Audio output 1000 mili watts, Mono RCA , 2V p-p @ 8Ω 4V p-p @ 600Ω, 8V p-p @1200Ω

Size 5.5” x 4” x 1.5” (L x W x H) Color Black

Weight 0.5 pounds (1.00 pounds with power supply)

.

please note: use the royalty-free music titles to avoid annual licensing
payments to ASCAP and BMI for playing those titles on-hold

3

Volume control Wave

Volume

75

Not Mute

Windows Media Player

Volume setting

Note on PC audio connection: You may use a male to female extension audio
cord to extend the audio cord to 24 feet, use as many extensions as needed to
reach your PC. (Maximum tested audio cord length 2000 feet)

Advertising