ESPRIT ET1881 - Manual (Page 9)

ET188 8
n
STEP 3
Install, and just hand tighten for now, the two 5/16 x 1/2 socket head bolts (84) and
5/16 flat washers (69) into the front of the left and right upright tubes. Now install the 3/8
x 46mm socket head bolts (55) from the outside of the upright tubes, 3/8 flat washers
(71) and 3/8 nuts from the inside of the uprights and tighten all four bolts as tight as
possible.
n
STEP 4
Connect the computer cable (38) and pulse sensor wires (93) to the mating connectors
on the back of the console. Secure the console in place with the four M5 x 15mm screws
(60).