EAW SM84 - Manual (Page 2)

SPECIFICATIONS SM84
DIMENSIONAL DRAWING A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. SM84/2 pp October 2001 Printed in USA
The two-way full range loudspeaker system shall incorporate a
four 8-in LF transducers and a 3-in voice coil/1.4-in exit
neodymium compression driver. Powering mode is bi-ampli-
fied.
The LF drivers shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded on a constant directivity horn with a nominal coverage
pattern of 40° (h) x 90° (v).
System frequency response shall vary no more than ±3 dB from
60 Hz to 17 kHz measured on axis. The LF shall produce a
Sound Pressure Level (SPL) of 99 dB SPL on axis at 1 meter
with a power input of 1 Watt, and the HF shall be capable of
producing an output of 110 SPL on axis at 1 meter. The LF
shall handle 1000 Watts of amplifier power (continuous) and
have a nominal impedance of 4 Ohms. The HF shall handle 200
Watts of amplifier power and have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be irregularly triangular in
shape with its baffle angled up 53°. It shall be constructed of
multi-ply, void-free cross-grain-laminated Baltic birch ply-
wood and shall employ extensive internal bracing. It shall be
finished in wear-resistant textured black paint. Input connec-
tors shall be 4x Neutrik NL4 Speakon (2 per side). The front of
the loudspeaker shall be covered with a powder coated perfo-
rated steel grille backed with open cell foam to protect
against dust.
The two-way full range loudspeaker shall be the EAW model
SM84.
FRONT
GRILLE PARTIALLY SHOWN
29.75
BACK
12.50
SIDES
.73
4.00
3.00
2X INPUT
R 13.00
8.61
.59
.59
15.90
6.96
4.00
TOP
509067(A)
8/31/00
Manufacturing tolerances are +/- 0.13 and +/- 1°