Lanner AV-ICE01 - Manual (Page 16)

Software User Manual Version 1.0.1
13
#./installer.sh
You will be prompted for a directory location to build the package and the Build Output
Directory. Use the default values provided by the installation script.
Note: If a failed to start device error is shown during the Acceleration installation,
ensure that the kernel option intel_iommu=off has been configured as specified in
the GRUB configuration file. If this kernel parameter is not specified, acceleration
ervices are only available in a guest operating system (in a virtualized environment).
3. During the instllation, the following message is displayed:
*** No error detected in InstallerLog.txt file ***
At the end of the installation, the following messages are displayed:
*** Acceleration Installation Complete ***
Refer to the InstallerLog.txt file for additional detail on the installation. It is also a good
idea to check /var/log/messages or dmesg to make sure that the acceleration service
started. Warning messages related to Invalid core affinity can be addressed by
modifying the configuration files dh89xxcc_aq_dev0.conf and h89xxcc_qa_dev1.conf)
so that no core numbers are referenced beyond the core count of the system.
Note: After building/installing the Acceleration Software, it is highly recommended
to secure the build output files (the files located in $ICP_ROOT\build) by either
deleting them or setting permissions according to your needs.
4. Use the 0 option to exit the installation.
5. After installing the Acceleration software, it is recommended to verify that the
acceleration software kernel object is loaded and ready to use. This can be done
by performing the following operation:
# lsmod | grep icp_qa_al