Nstalling the mounting bracket to the system, Chapter 3. rack mount installation, 1 installing the mounting bracket to the system – Lanner Rack Mount User Manual
Page 7
Advertising
Software User Manual
Version 1.0
5
Chapter 3. Rack Mount Installation
3.1 Installing the mounting bracket to the system
To install the mounting brackets, use the following procedures:
1. Replace the system’s robber feet with the flat-head threaded screws (the screws
should be included within the system’s package).
2. Align these two long brackets with the screw holes on the system’s bottom as
shown below.
3. Install the brackets onto the system with 4 screws (black, long threaded screws).
Advertising