Eton Mini300PE - Manual (Page 5)

M I N I 3 0 0 P E O P E R A T I O N M A N U A L
9
6 ANTENNA
A. For AM (MW) the radio uses an internal, directional,
ferrite bar antenna. Rotate the radio for best reception.
B. For FM/SW, fully extend the telescopic antenna (1). For
FM, rotate the antenna for best reception.
8
4 FM RADIO
Select the FM band by using the band selector switch (13).
Use the tuning knob (5) to tune the radio to the desired fre-
quency.
5 AM/SW1-8 RADIO
Select the desired band, AM or SW 1-7, by using the band
selector switch (13). Turn the tuning knob (5) to the desired
frequency, which appears in the display (2) or just tune
around and listen for stations. Note that MW appears in the
display when AM is selected, as the AM band is called MW
for medium wave in some parts of the world. SW appears in
the display when SW1-8 is selected.