LeMond RevMaster Pilot - Manual (Page 17)

Page 17
kEY FUNCTIONS
[sTaRT]
The start key will start the timer and enable the cadence me-
ter to begin calculating HR and Kcal values.
[CLEaR]
A short press (< 3 sec) of the clear key will reset the time, •
distance and calorie measurements.
Pressing and holding the clear key (> 3sec) will reset the
•
AVG (average) and MAX (maximum) values for cadence
and HR measurements. In addition, the calorie calcula-
tion values will be reset to their default values
[sTOP]
The stop key will stop the calculation of the time, distance
and calorie measurements without resetting the values of the
measurements. Pressing the start key again will restart the
console
[CadENCE]
The cadence key allows you to change the cadence section
of the display window between INST (instantaneous) RPM,
AVG (average) RPM, MAX (maximum) RPM, INST (instan-
taneous) MPH/KPH, AVG (average) MPH/KPH, and MAX
(maximum) MPH/KPH.
[
∧
]
The up arrow allows you to increase the default max HR,
min HR, ambient HR, age, and weight for target heart zone
training and calorie calculations.