Bang & Olufsen BeoVision 5 - Manual (Page 34)

34
Maintenance
Normal maintenance, such as
cleaning the BeoVision 5, is the
responsibility of the user. To achieve
the best result, follow the instructions
to the right.
Any defective parts are covered by
the guarantee during the warranty
period. Please consult your Bang &
Olufsen retailer to determine
recommendations for normal
maintenance.
Cleaning cabinet surfaces…
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a lint-free, firmly wrung cloth, dipped in
a solution of water containing only a few
drops of mild detergent, such as washing-up
liquid.
About the plasma screen…
Clean only with a dry, soft cloth. Do not use
liquid cleaners or aerosol cleaners.
Do not allow still pictures to be displayed on
the screen for an extended period of time, as
this can cause a permanent after-image to
remain on the screen. Examples of still
pictures are logos, video games, computer
images and images displayed in 4:3 picture
format.
Cleaning the Beo4…
Wipe the Beo4 remote control with a soft,
lint-free, wet cloth which is wrung firmly.
Changing the batteries
When BATTERY appears in the Beo4 display, it
is time to change the batteries in the remote
control.
The Beo4 requires three batteries. We
recommend that you use 1.5 volt (size AAA)
Alkaline batteries only. Replace the batteries
as shown on this page. We recommend that
you keep a finger on top of the batteries until
the lid is replaced.
When you have replaced the batteries, you
must wait for about 10 seconds until the
display reads TV. The Beo4 remote control is
then ready to operate again.
1
2
3
1
2
Never use alcohol or other solvents to clean any
part of BeoVision 5!
NOTE! If the front screen glass should crack or
chip, or if it should be damaged in any way, it
must be replaced immediately, as it could
otherwise cause injury. Please contact your
Bang & Olufsen retailer.