Linkskey LKV-IPM01 - Manual (Page 12)

KLE User Guide R1.2
1.3 KLE External Views
KLE Front View
KLE Front-panel
PS/2 Keyboard port
This is where you connect the PS/2 keyboard for local console.
PS/2 Mouse port
This is where you connect the PS/2 mouse for local console.
Console Management Port (RJ-12)
This is where you connect the serial console cable for advanced console
management of KLE unit via a serial terminal emulation utility such as Windows
HyperTerminal.
Status LEDs
The 10/100Mbps LED is lit as solid orange when the current digital link is running on
100Mbps speed.
The Link/Act LED gives off solid green light when a network link is established and
flashes whenever network transmission are perceived on the digital port.
The Power LED indicates the Power On status when it is lit as solid green.
The Video LED indicates the normal functioning of video server when it is blinking.
Restore-to-Default Button
The Restore-to-Default button is a tiny recessed button located to the right of the
LED indicators, and can only be accessed by prying down with a pointed needle tip.
To depress the recessed button for over 4 seconds, and upon release, it will restore
KLE to factory default – the default IP settings and user account settings that come
with factory default settings.
- - 8