Escort MN-CR-MEM - Manual (Page 14)

USER GUIDE
©
Escort Data Logging Systems LTD DATED: 03/07/07 PAGE 14
Ribbon Cassette Replacement
Printing on plain paper in the ChartReader is achieved by use of an inked ribbon which is
contained in a replaceable cassette mounted on the printer mechanism.
The ribbon will normally last for 2 to 3 rolls of paper.
To replace the ribbon cassette, perform the following steps:
n
Open the lid of the ChartReader.
o
Press down on the right end of the ribbon cassette to pop the left end up.
The cassette can now be lifted out.
p
Pass the paper through the new ribbon cassette and load the cassette in the mechanism
by positioning the left end of the cassette in the mechanism and gently pushing the right
end into place.
q
Using the star-shaped disc on the left of the ribbon cassette, tighten the ink ribbon by
turning the wheel clockwise, so it is straight and lying neatly behind the paper in the
mechanism.
r
Close the case lid making sure the paper feeds through the gap in the lid and secure the
lid catch.
.