LW Scientific Pipette Shaker - Manual (Page 2)

Controls
•Three position Power Switch: Used to turn the Pipette Shaker on and off. Postitions are ON, OFF, and TIMER.
ON setting runs continuously.
•Red Power light: Signals the unit is on.
Operation
1. Place samples on the top of the holder
2. Turn on the Power switch to ON or TIMER position
Specifications
Speed: 2500 RPM
Power: 110V / 60Hz (220V available)
Height: 158.75mm (6.25 in)
Width: 133.35mm (5.25 in)
Weight: 1.9Kg (4.2 lbs.)
P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046
Notes for Safe Use:
•Do not operate unit in or near water or other liquids.
•Unplug unit before cleaning or repairing.
•Do not use if electrical cord is damaged.
•Replace cord if damaged.