Markbass MB 1000 - Manual (Page 6)

6. TEChNICAL SPECS
INPUTS
INPUTS LEFT/MONO (BRIDGE) & RIGHT Balanced, impedance 5 Kohm / maximum voltage: 30 Vpp
GND LIFT One for each channel
OUTPUTS
LINK Balanced, parallel output for each channel (one GND lift for each
channel)
POWER OUTPUT 300+300W @ 8 ohms, 500+500W @ 4 ohms,
1000W @ 8 ohms bridged
Power consumption: medium 500W, maximum 1200W
CONTROLS
LEVEL
Left/Mono, Right
LIMITER ON/OFF Left/Mono, Right
BRIDGE On/Off
OThER
SLEW RATE 10 V/us
DAMPING FACTOR >60
NOISE RATIO >100 dB/A
FREqUENCy RESPONSE 3 Hz to 20 kHz
SENSITIVITy 500mVp
POWER DEVICES switching MOSFETs
DIMENSIONS 1 Unit standard rack, 365 mm deep
WEIGHT 3,8 kg / 8.38 lbs.
POWER SUPPLy 100/120V/230V/240V 50/60Hz
(Version factory preset inside the equipment)
Markbass apparatuses are manufactured to be sold and used in
the country of purchase, and are factory preset to that country’s
voltage. Due to homologation issues, the voltage may not be
changed.
7. BLOCk DIAgRAM
BRIDGE
LIMITER
LIMITER Power
Amp
Power
Amp
Power
Output
Power
Output
Link
Buffer
Inverter
Link
Buffer
06