Markbass Distorsore User Manual
Page 3
03
2. CONTENTS
IntroductIon
3
FunctIon overvIew
4
connectIons
4
tecHnIcAL sPecs
5
bLock dIAgrAm
5
user settIng cHArt
5
3. IntroductIon
congratulations on your purchase of the markbass dIstorsore!
dIstorsore (we chose an Italian name to express how proud we are to manufacture all our products in Italy) is a real tube distortion pedal. It gives you all the control you need to find
just the right distorted sound for your applications, which you can always balance perfectly with your clean sound in bypass mode.
the dIstorsore features an ecc 83s tube that distorts your sound, and you can also compress your signal before it’s sent to the tube. the High Pass and Low Pass filters let you choose
what frequency range you want to distort.
Like all our pedals, this unit features “true bypass”. this means that when the distortion is ‘off’, your signal goes directly from the input jack to the output jack without any degradation
of audio quality.
dIstorsore is no mere stomp box… it’s an exciting state-of-the-art tube distortion pedal that gives you the warm tube crunch that you only get from tubes, while honouring the
natural tone of your instrument and your playing.
this manual will help you get the most out of your dIstorsore pedal. If you have any questions after reading it, please feel free to contact our online customer service department
at [email protected]. thank you again, and enjoy your dIstorsore.