Escort Passport 8500 - Manual (Page 15)

Overview of EZ-Programming Options
13
Press the REVIEW button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
AUDIOTONES
CITY MODE SENSITIVITY
BRIGHTNESS
DARK MODE
BANDS
*
Factory Default Settings
To reset Passport to its original
factory settings, press and hold
the “CITY,” “DIM,” and “MUTE”
buttons while turning the power
on. Passport’s display will
provide a “Reset” message,
accompanied by an audible alert,
acknowledging the reset.
Pilot HWY
Pilot H
Pilot H.>
Pilot +
Pilot +.>
Pilot +>
Pilot V
PwrOn STD
PwrOn FST
Meter STD
Meter EXP
Meter SPC
aMute ON
aMute OFF
Tone STD
Tone LOUD
City STD
City LoX
City NoX
Brt LAST
Brt MIN
Brt MED
Brt MAX
Brt DARK
DARK LAST
DARK LAST
Bands ALL
Bands MOD
X ON or OFF
K ON or OFF
Ka ON or OFF
LSR ON or OFF
SWS ON or OFF
Press the CHANGE button
to change your setting
within a category
*
Full word: Highway or Auto or City
Letter: H or A or C
Letter, with scanning dot
Symbol: + or • or --
Letter, with scanning dot
Scanning symbol
Vehicle voltage
*
Standard power-on sequence
Fast power-on sequence
*
Standard signal strength meter
Expert Meter
SpecDisplay
*
AutoMute on
AutoMute off
*
Standard tones
Loud tones
*
Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
*
Last brightness used
Minimum brightness when turned on
Medium brightness when turned on
Maximum brightness when turned on
Dark Mode when Passport turned on
*
Standard Dark: shows HD, AD, CD
All Dark, no display
*
All bands enabled
One or more bands are disabled
Turn bands “ON” or “OFF” by
pressing the Mute button