Exmark Ultra Vac QDS 00 & Higher - Manual (Page 21)

Maintenance
WARNING
Under normal use the cloth mesh will
deteriorate and wear. Objects could exit
through worn cloth mesh at high speeds.
Thrown objects can cause serious injury or
kill you or bystanders.
Check cloth mesh frequently for tears and
holes. Replace worn cloth mesh.
Check Exhaust Diverter
Service Interval: Before each use or daily
CAUTION
The exhaust diverter is hot. Touching a hot
exhaust diverter can cause severe burns.
Allow the exhaust diverter to cool completely
before performing maintenance.
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Inspect and remove debris from the exhaust
diverter daily.
Lubricate Grease Fittings
Note: See chart for service intervals.
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Lubricate fittings with NGLI grade #2
multi-purpose gun grease.
Refer to the following chart for fitting locations
and lubrication schedule.
Lubrication Chart
Fitting
Locations
Initial
Pumps
Number of
Places
Service
Interval
1. Idler
Bushings
1–2 1 25 Hours
2. Door
Handle 1–2 1 25 Hours
3. Lift
Handle Pivot
(LZUVQD11
Only)
1–2 1 Yearly
Check Condition of Belt
Service Interval: Every 50 hours
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Inspect the belt for damage or wear. Replace belt
with one of the following:
Deck Part No.
48 inch 1-653333
52 inch 1-653438
60 inch 103-0866
72 inch 103-0867
21