Parkside PGG 15 A1 - Manual (Page 60)

60 GB/MT
this you will be in a better position to control the device in unfore-
seen circumstances.
f) Wear suitable clothing. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves clear of
moving parts. Loose clothing, jewellery or long hair can become
trapped in moving parts.
g) If vacuum dust extraction and collection devices are fitted
do not forget to check that they are properly connected
and correctly used. The use of these devices reduces the haz-
ard presented by dust.
4. Careful handling and use of
electrical power tools
a) Do not overload the device. Always use an electrical
power tool that is intended for the task you are un-
dertaking. By using the right electrical power tool for the job
you will work more safely and achieve a better result.
b) Do not use an electrical power tool if its switch is de-
fective. An electrical power tool that can no longer be switched
on and off is dangerous and must be repaired.
c) Pull the mains plug from the socket before you make
any adjustments to the device, change accessories or
when the device is put away. This precaution is intended to
prevent you from unintentionally starting the device.
d) When not in use always ensure that electrical power
tools are kept out of reach of children. Do not let any-
one use the device if he or she is not familiar with it
or has not read the instructions and advice. Electrical
power tools are dangerous when they are used by inexperienced
people.
General safety advice for electrical power tools
66133_Mini-Graviergerät_content_LB5.indd 60 03.06.11 16:58