Parkside PGG 15 A1 - Manual (Page 8)

8 GB
Introduction / General safety advice for electrical power tools Introduction
Included items
1 Power engraving tool PGG 15 A1
2 Engraving stencils
1 Operating instructions
Technical details
Rated voltage: 230 V∼ 50 Hz
Mode of operation: intermittent operation: S3 20 %
Rated current:
0.15 A
Stroke rate: 6000 min -1
Noise and vibration data:
Measured values for noise are determined in accordance with
EN 60745. The A-weighted noise level of the electrical power tool
are typically:
Sound pressure level: 74.4 dB(A)
Sound power level:
85.4 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration: 1.582 m / s
2
Uncertainty K = 1.5 m / s 2
The vibration level given in these instructions has
been measured in accordance with a standardised measurement pro-
cedure specified in EN 60745 and can be used to compare devices.
66133_Mini-Graviergerät_content_LB4.indd 8 03.06.11 16:59