Parkside PLBS 30 A1 - Manual (Page 58)

59 GB/MT
Introduction
Fine soldering iron set PLBS 30 A1
Q
Introduction
Please make sure you familiarise yourself fully with the way
the device works before you use it for the first time and that
you understand how to handle it correctly. Please read the
operating instructions below. Be careful to keep these advice notes
and if necessary pass them on to a third party.
Q
Proper use
The appliance is intended for electronic soldering for leisure and DIY
purposes. It is designed for uses such as soldering work, wood-engrav-
ing, welding and gluing plastics and the application of decorations.
Use the device only as described and for the indicated purposes. The
device is not intended for commercial use. Any other use or modifica-
tion to the device shall be considered as improper use and could give
rise to considerable dangers. The manufacturer will not accept
liability for loss or damage arising from improper use.
Do not drink!
Dispose packaging and appliance in an
environmentally-friendly way!
61647_par_Feinloetkolben-Set_PLBS30A1_content_LB5.indd 59 15.02.11 15:40