Epson PhotoPC 600 - Manual (Page 83)

Macintosh users must enable the PC Exchange extension
software to access files on CompactFlash Cards. See your
Macintosh user’s manual for more information.
Follow these steps to use the optional adapter:
1. Insert the memory card into the optional adapter all
the way, as shown below.
2. Insert the adapter into your computer’s Type II
PCMCIA slot.
Now you can access the photos in the memory card from
your computer.
Using the AC Adapter
The AC Adapter (B86703✽) allows you to connect your
PhotoPC 600 to a standard electrical outlet. This is
especially useful when you are transferring pictures and
operating the camera from your computer. The adapter
powers the camera, but does not charge the batteries. In
some locations the AC adapter comes with a separate AC
power cable.
Note:
The asterisk in the product number (B86703✽) is a substitute
for the last digit, which varies by country.
w
Warning:
Use only the AC adapter designed for PhotoPC 600.
Use of any other adapter could cause fire, electrical
shock, or injury. Do not use the AC power cable and
the adapter for any purpose other than powering your
PhotoPC 600. If the AC plug doesn’t fit your outlet,
have a proper outlet installed by a qualified electrician.
To avoid radiation danger, do not expose or remove the
ferrite core.
6
R Poppy Rev.B/TCAT
A5 size Chapter 6
97/09/18 pass 4
Camera Options 83