Parkside PAS 500 C2 - Manual (Page 15)

12 PAS 500 C2
GB
Troubleshooting
In this chapter you will receive important information for malfunction localisation
and remedies.
WARNING
Pay heed to the following safety information to avoid risks and property
damage:
► Repairs to electrical appliances may only be carried out by specialists who
have been trained by the manufacturer. Considerable risk for the consumer
and damage to the appliance can occur as a result of incompetent repairs.
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause Solution
The appliance
will not switch
on
The plug is not connected.
Insert the plug into the mains
power socket.
The mains power socket is not
providing power
Check the house fuses
Safety stop due to missing or
incorrectly inserted HEPA fi lter
13
or wire fi lter basket 14
Fit the HEPA-Filter 13 and/or wire
fi lter basket 14 correctly
On/Off switch 6 defective
Repair by Customer Services
Motor defective
Low or lack
of suction
Suction hose 11 or suction
pipe 12 blocked
Remove obstructions and blockages
Metal container 10 is not closed Close the metal container 10
Metal container 10 is full Empty the metal container 10
HEPA-Filter 13 is blocked Clean or replace the HEPA-Filter 13
Air fi lter 15 is blocked Clean the air fi lter 15
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
Buch_75872_LB4.indb 12 Buch_75872_LB4.indb 12 22.06.12 14:41 22.06.12 14:41