Pneumatic water sprayer pdws 8 a1 introduction, Intended use, Features and fittings – Parkside PDWS 8 A1 User Manual

Page 26: Technical data

Advertising
background image

30 GB

Introduction / General safety instructions for air tools

Introduction

Pneumatic water sprayer

PDWS 8 A1

Introduction

Congratulations!
You have chosen high-quality device by our company.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Initial operation of this tool must be performed
by trained personnel.

KEEP OUT OF THE REACH OF CHILDREN!

Intended use

The pneumatically operated water jet is suited to the
generation of a high-pressure water jet of variable
intensity. Keep these instructions in a safe place.
When passing this product on to others please also
include all documents. Any use other than the in-
tended is prohibited and potentially dangerous.
Damages resulting from noncompliance or misuse
are not covered by the warranty and are not in-
cluded in the manufacturer‘s liability. This device
has been designed for household use and may not
be used for commercial or industrial purposes.

Features and Fittings

Check that all the items are present and
that the device is in perfect condition im-
mediately after unpacking. Do not use
the device if it is defective.

1

Compressed air connection (for plug-in nipple ¼“)

2

Extractor

3

Water connection

4

Flow control

Technical data

Air consumption:

approx. 350 l / min

Operating pressure:

2–9 bar

Max. operating pressure:

9 bar

Compressed air connection: ¼“ (6.35 mm) NPT
Weight:

approx. 290 g

Air supply:

via maintenance unit
with filter pressure re-
ducer

Required air quality:

purified, condensa-
tion-free

Compressors:

with min. 50 l tank
volume

Max. water temperature:

30 °C

Water pressure:

max. 5 bar

Flow:

3–4.5 l / min

The following pictograms are used in these operating instructions / on the device:

Note

Wear hearing protection, dust protection

mask, protective glasses and protective

gloves.

Observe caution and safety notes!

Supply hose

Risk of explosion!

Dispose of packaging and device in

an environmentally friendly way!

Never use hydrogen, oxygen, carbon

dioxide or other bottled gasses as an

energy source.

74767_par_Druckluft Wasserstrahler PDWS 8 A1_Content_LB2.indd 30

16.05.12 15:54

Advertising