Parkside Pipe Cleaning Set - Manual (Page 19)

19
MT GB
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
The operating instructions constitute part of
this product. They contain important infor�
mation on safety, use and disposal.
Before using the product, familiarise your�
self with all of the operating and safety
instructions. Use the product only as de�
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The pipe cleaning set clears bloc�ages
from pipes, down pipes, drains and toilets.
The equipment is intended for use with the
�ar�side pressure washers �HD 100 A1,
�HD 100 B2, �HD 150, �HD 150 A1 and
�HD 150 B2 Operating pressure (Rated
pressure) max. 110 bar. The equipment is
suitable for the following pipes:
� Curve C no more than 90°;
� Diameter D at least 40 mm;
� Radius R at least 70 mm.
min
D = 40mm
min
R = 70mm
K = 90°
max
The equipment is not intended for commer�
cial use.
The operator or user is responsible for ac�
cidents or damages to other people or their
property.
The manufacturer is not liable for damages
caused by use other than for the intended
purpose or improper operation.
Functional description
The pipe cleaning set comprises a nozzle
head and a 15 m long, flexible hose,
which can be connected to a pressure
washer. The hose is moved through the
pipe by the four high�pressure jets that are
directed bac�wards and the bloc�age is
released by the water jet.
See the front fold�out page for
illustrations.
Overview
1 �ipe cleaning set
2 Mar�ing ring
3 �ipe cleaning hose
4 Connecting piece
5 Nozzle head
6 Scale
7 Red safety mar�ing
8 �ressure washer jet gun (sold
separately)
Technical specifications
High-pressure hose
Inta�e temperature .................. max. 60°C
Length ....................................... 15 m
Use the product only as described
and for the applications specified: