Parkside High-Pressure Extension Hose - Manual

1
1 2
1 High pressure connection
on the equipment hose
2 High pressure connection
on the gun side
3 Adapter for high pressure connection
on the gun side
4 Adapter for high pressure connection
on the equipment hose
Also observe the safety instruction
for your pressure washer.
Pressure washers can be dan-
gerous if used incorrectly. Do
not direct the jet at people, ani-
mals, live electrical equipment or the
equipment itself.
Technical specifications
Use the product only as described and for
the applications specified:
3 4
GB IE
High-pressure hose
Length ............................................. 6 m
Rated pressure max. ....110 bar / 11 MPa
Max. pressure .............160 bar / 16 MPa
Intake temperature ..... max. 60°C / 140°F
Initial Operation
Screw the high pressure connection on the
equipment hose (1) to the high pressure
hose of your pressure washer.
Screw the high pressure connection on the
gun side (2) to the spray gun of your pres-
sure washer.
The high pressure extension hose is an ac-
cessory for PHD 150 B2 / PHD 150 A1/
PHD100 B2 /PHD 100 A1. For use with
another device, the enclosed adapters 3
and 4 may be helpful.