Parkside PDSS 310 A1 - Manual (Page 48)

48 GB
Introduction / Safety instructions for air tools Introduction
Pneumatic impact wrench
PDSS 310 A1
Introduction
Congratulations! You have chosen a high-
quality device from our company. Famili-
arise yourself with the product before
using it for the first time. In addition, please carefully
refer to the operating instructions and the safety
advice below. Initial operation of this tool must be
performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
This air powered impact driver is suitable for loose-
ning and tightening screw connection during as-
sembly and repairs, and for loosening bolts when
changing tyres. Only use the product as described
and for the specified applications. Keep these in-
structions in a safe place. When passing this product
on to others please also include all documents. Any
use not specified is prohibited and potentially dan-
gerous. Damages resulting from noncompliance or
misuse are not covered by the warranty and are
not included in the manufacturer‘s liability. This de-
vice has been designed for household use and may
not be used for commercial or industrial purposes.
Features
Verify contents are complete and the de-
vice is in perfect condition immediately
after unpacking. Do not use if the tool is
defective.
1 Adjustable screw
2 Compressed air connection (for ¼“ plug nipple)
3 Torque control
4 Trigger
5 Oil filling port
6 Pivot bolt (forward / reverse)
7 Square drive
The following parts are considered
accessories:
8 Extension
9 Plug nipple (¼“ = 6.35 mm)
10 Machine oil
11 Lubricator
12 Allen key
13 Socket attachments
Technical Data
Air consumption: approx. 350 l / min
Operating pressure: max. 6.3 bar
Square drive: ½“ (12.7 mm)
Compressed air connection: ¼“ (6.35 mm) NPT
Tool intake:
½“ (12.7 mm)
Max. torque: 310 Nm
The following pictograms are used in these operating instructions / on the device:
Refer to operating manual! Compressed air hose
Follow warnings and safety notices! Note
Never use hydrogen, oxygen, carbon
dioxide or other bottled gasses as an
power source
Dispose of packaging and device in an
environmentally friendly way!
Wear ear protection, dust mask, safety
glasses and protective gloves.
73786_par_Druckluft-Schlagschrauber PDSS 310 A1_content_LB2.indd 48 30.05.12 17:00