Parkside PLBS 30 A1 - Manual (Page 14)

14 GB
Operation Operation
Q
Operation
Q
Switching on and off
Switching on:
Insert the mains plug into a suitable mains socket.
Switching off:
Pull the plug out of the mains socket to switch off the device.
Q
Third hand
CAUTION! DANGER OF BURNS! The clips on the third
hand
5 can become hot while you are soldering the work-
piece.
1. Fold out the third hand 5 upwards.
2. Rotate the clips 4 until they are oriented in the required direction.
3. Clamp the workpiece between the two clips 4 .
Q
Solder sponge
CAUTION! The hot soldering tip 2 must never be placed in
contact with a dry solder sponge 8 , otherwise the solder sponge
may be damaged.
The solder sponge 8 is used to clean soldering tips.
Moisten the solder sponge 8 before you use it.