Cleaning/maintenance, Gb mt – Parkside PNTS 1500 B2 User Manual

Page 42

Advertising
background image

42

GB MT

2. Fit the filter cover (11b) and turn it gen-

tly to lock it:

To lock the filter cover

To unlock the filter cover

Vacuuming.fine.dust:

While vacuuming fine dust, you

may find dirt accumulating faster

than usual. For this reason, we

recommend the use of a paper filter

bag for fine dust.

3. Fold the paper filter bag (12) up com-

pletely and turn it over the internal noz-

zle of the suction tube.

The sealing ring on the filter bag open-

ing must completely enclosed the arm

on the suction nozzle.

Wet vacuuming

For wet sucking or to suck up water, place

the foam filter (13) on the filter box on the

motor head (3).

When the container is full, the suc-

tion opening is shut off by a float,

and suction is then cut off. Switch

the appliance off, remove the plug

from the socket and empty the con-

tainer (see Cleaning/maintenance).

If.foam.or.liquid.exits,.switch.off.

the.machine.immediately.

Blowing

To use the blower function, screw the

vacuum hose (18) on to the nozzles on the

engine housing (3) (operation without the

use of filters).

Powertool vacuuming

The.Powertool.hose.can.be.used.for.

the.following:

• Cleaning hard-to-reach places or sensi-

tive equipment.

• Connecting powertools for vacuuming

dust off.

Place the thicker end of the powertool hose

(19) straight onto the vacuum hose (18)

and the other end onto the reduction adap-

tor (20) supplied. You can now fit vacuum

nozzles or an electrical tool.

The reduction adaptor also fits onto

the vacuum hose (dust vacuuming

without the powertool hose).

Cleaning/Maintenance

Pull out the mains plug.

Danger of electric shock.

Never.hose.the.appliance.

down.with.water..Never.use.

aggressive.cleaning.agents.

or.solvents..This.could.dam-

age.the.appliance..

• After use, empty the waste tank (

5). Opening the drain plug to allow the

vacuumed liquid to drain out (

7).

• Clean the waste tank with a damp

cloth.

• Wash the foam filter with lukewarm

water and soap, and allow to dry.

• Beat the dust out of the cloth filter

(

11) and clean it with a paint brush

or hand brush.

• Replace the paper filter bag (

12)

when full (see “replacement parts” for

reordering)

Advertising