Technical specifications, Initial operation, Guarantee – Parkside High-Pressure Extension Hose User Manual

Page 5: Gb mt

Advertising
background image

1 High pressure connection

on the equipment hose

2 High pressure connection

on the gun side

3 Adapter for high pressure connection

on the gun side

4 Adapter for high pressure connection

on the equipment hose

Also observe the safety instruction

for your pressure washer.

Pressure washers can be dan-

gerous if used incorrectly. Do

not direct the jet at people, ani-

mals, live electrical equipment or the

equipment itself.

Technical specifications

High-pressure hose

Length................................................. 6 m

Max. pressure ................160 bar / 16 MPa

Intake temperature ......max. 60°C / 140°F

Initial Operation

Screw the high pressure connection on

the equipment hose (1) to the high pres-

sure hose of your pressure washer.

Screw the high pressure connection on

the gun side (2) to the spray gun of your

pressure washer.

The high pressure extension hose is an

accessory for PHD 150 A1. For use with

another device, the enclosed adapters 3

and 4 may be helpful.

Be aware of the increased risk of

tripping when using your pressure

washer with the high pressure ex-

tension hose.

Do not run over, squash or crease

the high pressure extension hose.

There is a risk of damage and the-

refore injury to you.

• Store the equipment in a frost-proof

room.

Guarantee

• The product is not suitable for commer-

cial or professional use.

• Justified guarantee claims should be

reported to our Service Centre (see

cover page for telephone & fax no.s,

and email address). Our Service Team

will tell you more about our complaints

handling procedure.

• Damage due to natural wear and tear,

overload or incorrect use is excluded

from the guarantee.

• Furthermore, the prerequisite for guar-

antee services is that the references

indicated in the operating instructions

regarding cleaning and maintenance

have been adhered to.

• Damage, which has been caused from

material or manufacturing faults, will be

made good free of charge, by replace-

ment delivery or repair.

This requires that the appliance is re-

turned to our service center undisman-

tled and with proof of purchase and

guarantee.

• Devices sent in freight collect - by bulk

freight, express or with other special

freight - are not accepted.

• Defective units returned to us will be

disposed of for free.

GB MT

Advertising