Mt gb trouble shooting – Parkside PHD 150 A1 User Manual
Page 42
42
MT
GB
Trouble shooting
Problem
Possible cause
Remedy
Washer is not
operating
ON / OFF switch (10) is
turned off
Check ON / OFF switch (10)
�amaged power supply
cable (6)
Check power supply cable (6) for
damage. If necessary have the power
supply cable (6) replaced by a quali�
fied electrician.
Mains fault
Check the electrical system for confor�
mity with the data on the rating plate.
Washer does
not generate
any pressure
Air trapped in the pressure
washer
Turn on the washer with high�pressu�
re hose until bubble�free water flows
out of the high�pressure connection.
�rop in the water mains
pressure
Check the water mains.
Severe pressu�
re fluctuations
High�pressure nozzle (17)
is dirty
Rinse the high�pressure nozzle (17)
with water. If necessary clean the
nozzle hole with a needle.