Parkside PFBS 9.6 A1 - Manual (Page 57)

57 GB/MT
Function Accessory Application
Polishing,
derusting
CAUTION!
Use only the lightest
contact pressure of
the tool on the work-
piece.
Metal brush 16 Derusting (see Fig. E)
Polishing wheel 14 Working on various metals and plastics, in
particular noble metals like gold or silver
(see Fig. F)
Cleaning Plastic brush 19 E.g. cleaning complex plastic housings or the
area around a door lock
Metal brush 16 e.g. derusting (see Fig. E)
(The metal brush is softer than steel)
Grinding Grinding wheels 15 ,
grinding bits 22
Grinding of stone, precise tasks on hard materials,
such as ceramics or alloy steel (see Fig. G)
Cutting Cutting discs 17 Cutting metal, plastic (see Fig. H)
Operation / Maintenance and cleaning / Service / Warranty Operation
Q Tips and tricks
If you use press too hard you run the risk of break-
ing the tool or damaging the workpiece. You will
achieve the best results by operating the tool at a
constant rotational speed and using a low contact
pressure on the workpiece.
Q Maintenance and cleaning
Q
Maintenance
Before and after a prolonged period of
non-use fully charge the battery pack
3 a .
Q
Cleaning
Clean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.
Q
Service
Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
If the plug or lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
Q Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.