Changing the bits / screwdriver bit inserts, Preparing the tool for use, Switching on / off the cordless screwdriver – Parkside PAS 3.6 B1 User Manual
Page 26: Changing the direction of rotation, Tips and tricks, Maintenance and cleaning
26 GB/MT
Service / Warranty / Disposal
Before first use / Preparing the tool for use / Maintenance and cleaning
time without risk of shortening battery life. Interrupt-
ing the charging process does not damage the
battery.
Starting the charging process:
Connect the Battery charger
9
to a 230 V~
50 Hz mains socket.
Connect the Battery charger
9
to the charging
socket on the device
5
.
The rechargeable battery is charged when the
battery indicator
3
changes from red to green.
ending the charging process:
Disconnect the Battery charger
9
from the
mains socket.
Disconnect the Battery charger
9
from the
charging socket on the device
5
.
Q
Changing the bits /
screwdriver bit inserts
Insertion:
Insert the bit directly into the tool holder
8
.
removal:
Pull out the bit out of the tool holder
8
.
Q
Preparing the tool for use
Q
Switching on / off the
cordless screwdriver
Switching on:
To start the appliance squeeze on the ON /
OFF switch
6
and then keep it pressed down.
Switching off:
To stop the appliance, release the ON / OFF
switch
6
.
Q
Changing the
direction of rotation
Clockwise:
Slide the direction of rotation switch
1
to the left.
Press the ON / OFF switch
6
. The direction
indicator (clockwise)
4
illuminates. You can
now screw in the screws.
Anticlockwise:
Slide the direction of rotation switch
1
to the
right.
Press the ON / OFF switch
6
. The direction in-
dicator (anticlockwise)
2
illuminates. You can
now screw out the screws.
Lock:
Slide the direction of rotation switch
1
into
the middle position. The ON / OFF switch
6
is now locked.
note: The LED lights
7
can still be activated with
the ON / OFF switch
6
locked. Simply press the
ON / OFF switch
6
.
Q
tips and tricks
Screw bits are designated with their dimensions
and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits
in the screw head without any free play.
Q
Maintenance and cleaning
DAnGer oF eLeCtrIC
SHoCK! Pull the Battery charger
9
out of the
mains socket before carrying out any cleaning
of the device.
The cordless screwdriver is maintenance-free.
Always keep the device clean, dry and free of
oil or grease.
Do not allow any liquids to enter the device.
Use a cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.