Extron electronic XPA 2001 (XTRA) Series User Manual

Page 2

Advertising
background image

Specifications — XPA 1002, XPA 2001 (XTRA) Series, cont’d

Extron XPA 1002, XPA 2001-70V, HPA 2001-100V Half-Rack Audio Power Amplifiers • Specifications

2

High pass filter

XPA 2001-70V, XPA-2001-100V

80 Hz, 12 dB per octave rolloff (switch selectable)

Control/remote — amplifier

Control port ������������������������������������ (1) 3�5 mm captive screw connector, 5 pole
Pin configurations

DC volume control (analog)

Pin 1 = +10 VDC, 50 mA (max�), pin 2 = volume/mute (variable voltage),

pin 3 = GND

Volume control voltage range

0 V (mute) to 10 V (maximum volume)

Standby power control (contact closure)

Pin 4 = GND, pin 5 = standby

General

Power ���������������������������������������������� 100 VAC to 240 VAC, 50/60 Hz, internal

Typical ��������������������������������� 26 watts (1/8 power [pink noise] at 8 ohms)
Quiescent ���������������������������� 10 watts
Standby ������������������������������� <1 watt (triggered by contact closure or after 1 hour with no signal)

Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling ������������������������������������������� Convection, no vents, with internal heat sinks
Thermal dissipation

Standby ������������������������������� <1 watt (3 BTU/hr)
Idle ��������������������������������������� 10 watts (34 BTU/hr)
1/8 power (pink noise) ����� 4 ohms (x2): 14 watts

8 ohms (x2): 14 watts (48 BTU/hr)

70 V (XPA 2001-70V): 14 watts (48 BTU/hr)

Protection ��������������������������������������� Clip limiting, thermal, short circuit, DC output
Indication���������������������������������������� Limiter/Protect LED indicates the onset of clip limiting, thermal cycling,

short circuit, or DC output protection

Mounting

Rack mount ������������������������ Yes, with optional 1U, 9�5" deep rack shelf (RSU 129, #60-190-01;

RSB 129, #60-604-01)

Enclosure type ������������������������������� Metal
Enclosure dimensions ������������������� 1�7" H x 8�7" W x 9�5" D (1U high, half rack wide)

(4�3 cm H x 22�1 cm W x 24�1 cm D)

Product weight ������������������������������ 2�5 lbs (1�1 kg)
Shipping weight ���������������������������� 5 lbs (3 kg)
Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance

Safety ����������������������������������� CE, CUL, UL

UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke

release; meets UL 60065, IEC 60065, and BSEN 60065 for A/V equipment�

EMI/EMC �������������������������� CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, VCCI Class B
Environmental ������������������� Complies with the appropriate requirements of CEC, ENERGY STAR

®

(ENERGY STAR

®

qualified amplifier), EU code of conduct, RoHS, WEEE

MTBF ����������������������������������������������� 250,000 hours
Warranty ����������������������������������������� 3 years parts and labor

N

All nominal levels are at ±10%

N

Specifications are subject to change without notice.

7.6-111708-D13

Advertising
This manual is related to the following products: