Epson 3100Z - Manual (Page 11)

EPSON PhotoPC 3100Z
4/01 EPSON PhotoPC 3100Z - 1 1
If you’ve turned on the Confirmation setting in the Shot
Setup menu, your photographed image appears briefly in a
confirmation screen.
While the confirmation screen is visible, you can do the
following:
❏ Press the button next to Delete if you don’t want to keep
the picture.
❏ Press the button next to Rec Sound to record a message.
You see a countdown on the screen. During this time, you
can record a message into the camera’s microphone.
❏ Press the button next to to retain your image on screen.
(Press the button under BACK to return to the View menu
and continue taking pictures.)
Connecting the Camera to a Video
Device
You can display your photos, video clips, uploaded images,
and sounds on a multimedia projector, television, or other
video device. The video device will display whatever is shown
on the camera’s LCD screen. You can also connect your
camera to a VCR to record the images.
Use the video cable that came with your EPSON PhotoPC
3100Z to connect to the video equipment.
NOTE
The optional AC adapter is highly recommended when connecting to
a video device to save battery power.
Follow these steps:
1. Make sure your camera and connected video equipment are
turned off.
2. Open the camera’s connector cover and connect the black
end of the video cable to the AV Out port, as shown below:
3. Connect the yellow end of the video cable to the
VIDEO IN port and the white end of the cable to the
AUDIO IN port on the TV, projector, or VCR.
4. Turn on your camera and video equipment. (If necessary,
switch the TV, projector, or VCR to video mode.)
5. Turn the camera dial to .
The last image that you uploaded to the camera is displayed
on your TV or projector. If you are using the optional AC
adapter, you can also see the image on the LCD screen; if
you’re powering the camera with batteries, the screen will
remain blank.
You can use the camera’s slide show feature to play your
images and sounds automatically, or you can play them one
at time using the navigation buttons. (Press the
MENU
button to hide the on-screen text.) You can use any of the
camera’s playback features to view your photos.
6. When you’re done playing back pictures, turn your camera
and video equipment off. Then disconnect the cables.