Emerson Transmitters and Discrete Controllers Series 3000 - Manual (Page 8)

8 Micro Motion ® Series 3000 Transmitters and Discrete Controllers
Environmental specifications
Power supply
EMI effects All Series 3000 devices Meet EMC directive 89/336/EEC per EN 61326 Industrial, and all Series
3000 devices conform to NAMUR NE21 (June 1997).
Ambient temperature effect On analog outputs ±0.005% of span per °C
Ambient temperature limits (1)
(1) If exposed to direct sunlight, the ambient temperature can be expected to rise by an additional 50 °F (10 °C).
Operating –4 to +140 °F –20 to +60 °C
Storage –40 to +158 °F –40 to +70 °C
Temperature accuracy Models 3500 and 3700 ±1.0 °C ±0.5% of reading in °C
Temperature repeatability Models 3500 and 3700 ±0.2 °C
Humidity limits 5 to 95% relative humidity, non-condensing at 140 °F (60 °C)
Vibration limits Per IEC 68-2-6, endurance sweep, 5 to 2000 Hz, 50 sweep cycles at 1.0 g
AC power supply
Model 3300 85 to 265 VAC
50/60 Hz, 15 VA
0.25 A maximum at 85 VAC, 0.12 A maximum at 265 VAC
IEC 127-3/4 fuse, 0.63 A time-delay
Complies with European low-voltage directive 2006/95/EC per IEC 61010-1
Installation (Overvoltage) Category II, Pollution Degree 2
Models 3350, 3500,
and 3700 85 to 265 VAC
50/60 Hz, 30 VA
0.33 A maximum at 85 VAC, 0.15 A maximum at 265 VAC
IEC 127-3/4 fuse, 0.63 A time-delay
Complies with European low-voltage directive 2006/95/EC per IEC 61010-1
Installation (Overvoltage) Category II, Pollution Degree 2
DC power supply
Model 3300 18 to 30 VDC
7 watts typical, 14 watts maximum
IEC 127-3/4 fuse, 1.6 A time-delay
Models 3350, 3500,
and 3700 18 to 30 VDC
18 watts typical, 25 watts maximum
IEC 127-3/4 fuse, 1.6 A time-delay