Parkside PAS 7.2 A1 - Manual (Page 21)

18 PAS 7.2 A1
GB
CORDLESS SCREWDRIVER
PAS 7.2 A1
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important
information concerning safety, use and disposal.
Before using the product, please familiarise
yourself with all of the safety information and
instructions for use. Only use the unit as described
and for the specifi ed applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended purpose
This device is intended for driving screws into
wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
The device is not intended for commercial use. Any
other uses, and modifi cations to the appliance, are
deemed to be improper usage and may result in
serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage.
Equipment Components
Direction of rotation switch / lock
Battery display
Charging socket (device)
ON/OFF switch
LED light
Tool holder
Torque setting
Battery charger
Package contents
1 Cordless screwdriver PAS 7.2 A1
1 Battery charger PAS 7.2 A1-3
1 Carry case
9 bits x 25 mm
1 bit extension
1 operating instructions
Technical Data
Cordless screwdriver: PAS 7.2 A1
Rated voltage:
7.2 V
Rechargeable battery
(integrated):
LITHIUM
Rechargeable battery
capacity:
1300 mAh
No-load speed: n
0
0 - 230 min -1
Torque: max. 6.0 Nm (soft)
- 10 Nm (hard)
Tool holder: 6.35 mm (¼")
Battery charger: PAS 7.2 A1-3
INPUT:
Rated voltage:
230-240V ∼ 50/60 Hz
Current consumption: 0.2 A
OUTPUT:
Rated voltage:
9.5 V
Rated current: 500 mA
Charging time: approx. 3 hours
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in
accordance with EN 60745. The A-weighted noise
level of the electrical power tool are typically:
Sound pressure level: 62,3 dB(A)
Sound power level:
73,3 dB(A)
Uncertainty K: 3 dB
Total vibration (vector sum of three directions) is
calculated in accordance with EN 60745:
Screw driving
without impact:
Vibration emission value
a
h,D
= 0.253 m/s 2
uncertainty K = 1.5 m/s 2
IB_95883_PAS7.2A1_LB2.indb 18 IB_95883_PAS7.2A1_LB2.indb 18 26.02.14 08:41 26.02.14 08:41