Extron electronic CVEQ 100 Series - Manual

Specifications — CVEQ 100 Series, SVEQ 100 Series
1 Extron CVEQ 100, SVEQ 100 Line Drivers • Specifications
Video
Gain ................................................. Composite video and Y of S-video: -1 dB to +3 dB (x0.9 to x1.4), adjustable
C of S-video: 0 dB to +10 dB (x1 to x3), adjustable
Equalization ................................... 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable
Bandwidth (Y of S-video) ............. 185 MHz (-3 dB)
Output cable driving distance ..... Up to 1000' (300 m) with Extron MHR cable
Video input
Number/signal type
CVEQ 100 Series ................ 1 composite video
SVEQ 100 Series ................. 1 S-video
Connectors
CVEQ 100 ........................... 1 female BNC
CVEQ 100 D, CVEQ 100 AAP, CVEQ 100 MAAP
1 female RCA
SVEQ 100 ............................ 2 female BNC
SVEQ 100 D, SVEQ 100 AAP, SVEQ 100 MAAP
1 female 4-pin mini DIN
Nominal level ................................ 1 Vp-p for Y of S-video, and for composite video (including sync)
0.3 Vp-p for C of S-video
Minimum/maximum levels
CVEQ 100 Series ................ 0.4 to 2.0 Vp-p with no offset at unity gain
SVEQ 100 Series ................. For Y: 0.4 to 2.0 Vp-p with no offset at unity gain
Impedance ...................................... 75 ohms
Return loss ...................................... <-25 dB @ 0 to 5 MHz
DC offset (max. allowable)........... 4.0 V
Input coupling ............................... AC
Video output
Number/signal type
CVEQ 100 Series ................ 1 composite video
SVEQ 100 Series ................. 1 S-video
Connectors
CVEQ 100 ........................... 1 female BNC
CVEQ 100 D, CVEQ 100 AAP, CVEQ 100 MAAP
1 female BNC attached via 4" pigtail
SVEQ 100 ............................ 2 female BNC
SVEQ 100 D, SVEQ 100 AAP, SVEQ 100 MAAP
2 female BNC attached via 4" pigtails
Nominal level ................................ 1 Vp-p for Y of S-video, and for composite video (including sync)
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.4 to 2.0 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... -30 dB @ 5 MHz
DC offset ......................................... ±5 mV with no input signal
Floating: +0.1 to -0.6 V, depending on input signal content
Sync
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain ................................................. Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ± 0.5 dB
THD + Noise .................................. 0.015% @ 1 kHz at nominal level