Emprex GPS Bluetooth Receiver IGO-08A - Manual (Page 12)

8
after positioning successfully.
3. How to active Bluetooth enabled device
There are many Bluetooth enable devices like PDA or
Bluetooth dangle on the market, which direct connect with
IGO-08A. Each one may have different Bluetooth setup
procedure. Please refer to their user manual for detail
instruction.
Activate Bluetooth search and connect function of Bluetooth
PDA or dangle. A virtual comport will be assigned after
Bluetooth connection is successful.
Every time you want to connect IGO-08A with a new Master
Bluetooth device, which never pair before, user has to push
pairing switch of your master bluetooth device first.
(Bluetooth LED will blink quickly) Second, enable Master
Bluetooth device’ search Bluetooth device function, master
Bluetooth device will take few seconds fo find GPS and ask
for keying pass key. After entering valid PASS KEY,
connection will be setup. (Please refer to Bluetooth PDA or
other master Bluetooth device for details).
The PASS KEY (or PIN CODE) for IGO-08A is “0000”.
4. Running GPS navigation software
Verify and select Bluetooth virtual comport with default baud
rate for navigation software, then start to run navigation
software.
Note: Make sure the comport number of PC is the same as
Bluetooth virtual comport number.